Sky Pool Acrylic: What Builders Must Plan

How can a pool stay safe when the water is high above the street? And how does a heavy panel get up to the roof?

Grandview Acrylic says it has made pool and aquarium acrylic for more than 20 years. Its roof jobs in Dubai, Doha, Mexico City and Phnom Penh teach one thing about sky pool acrylic. Plan early. Fix the support, the lift and the numbers before casting starts. Next, we look at thickness, material data, the crane lift, checks and cost.

Sky pool acrylic is clear cast acrylic (PMMA) used in the walls or floor of a pool. The water sits over open space or on an upper level. Builders must settle three things. These are the thickness, the support frame and the crane route. Chief Tower in Phnom Penh uses 130 mm floor panels and 90 mm side panels.

sky pool acrylic

Four Things to Remember

  • Engineers pick the thickness for each project.
  • The panel never works alone. The frame, groove and seals help hold the water.
  • Plan the crane route before the crate is built.
  • There is no fixed price. Each panel is made for one project.

What Do Builders Mean by a Sky Pool?

A sky pool is a pool with water over open space or on an upper level. Part of the wall or floor is clear acrylic. You can see into the water through it. People call it by many names. These include suspended pool, bridge pool, rooftop pool and glass-bottom pool.

The name often comes up with Embassy Gardens in London. A pool there joins two buildings. It is only a name example here.

A cantilever pool reaches out past the edge of a building. Some of the water sits over empty air. The clear part is PMMA, not glass. It is not the same as a plain concrete edge on a regular pool. Grandview explains more in its guide to pools that reach past a building edge.

Common Pool Terms

TermWhat it meansClear part
Rooftop poolA pool on the upper level of a buildingSide window or wall panel
Glass-bottom poolA pool with a see-through floorFloor panel
End windowA clear wall at the end of the poolEnd panel
L-shape panelA clear wall that turns a cornerL-type panel

Why Is Sky Pool Acrylic More Than Just a Window?

A sky pool panel is part of the pool structure. It does not hold the water alone. The frame, the groove, the pads, the lining and the seals all help.

On the Dubai job, Grandview notes there is little room to fix a panel after it is lifted to the deck. So the checks happen at the factory, not on the roof.

The Order of Work

  1. Engineering: a computer test sets the thickness before casting.
  2. Casting: the panel is cast from virgin MMA.
  3. Fabrication: cut, shape, join and polish the panel. Ease stress with slow heating and cooling.
  4. Inspection: check the size and the surface.
  5. Packing: pack the panel in a steel frame made for the lift.
  6. Lift: a crane raises the crate to pool level.
  7. Install: set the panel, seal it and let it cure. Then fill the pool in stages.

What Is the Panel Made Of, and What Holds It Up?

The clear panel is cell-cast PMMA. It is made from 100% virgin MMA monomer from Lucite in Shanghai. Grandview calls thick cast panels like this structural acrylic. They act as part of the pool structure.

A concrete or steel frame carries the load. The panel sits in a groove called a rebate. Support pads, a waterproof lining, setting blocks, sealer and grout go in and around it. The project engineers decide how to hold down the building side.

Three-Side and Four-Side Support

Support typeHow the panel sitsCommon use
Three-sideBottom and both sides in grooves; top stays freeEnd panels and wet-edge pools
Four-sideAll four sides in groovesWhere extra hold is needed

How Do Engineers Check Water Force and Stress?

Water pushes on a panel with about 0.433 psi for every foot of depth. That is 9.8 kPa for every metre. Engineers use the lowest point, not the average depth.

Checks Before Casting

  • An ANSYS finite element analysis (FEA) test is a computer program. Forces of water and gravity are tested.
  • We do deflection testing. Under constant water pressure, they reveal the panel’s bending radius.
  • Inspecting the edges of the support and the grooves for stress.

For roofs that are not covered, the wind load is provided by the project engineer. Warmth also causes acrylic to expand somewhat. Its thermal expansion is 72 × 10⁻⁶ K⁻¹ (ISO 11359-1:2014). So the joints need room to move. Grandview shows its stress images on its design and engineering page.

How Thick Is Sky Pool Acrylic?

Many pool floors use panels about 100–130 mm thick. Grandview says this is only a guide. End windows are usually 40–60 mm, 80–100 mm or 120–200 mm.

Engineers decide on the ultimate figure. In doing so, they consider the loads, support, water depth, and panel size. The thickness cannot be determined by a single shot.

Real Project Panels

ProjectPanelSizeThickness
Chief Tower, Phnom Penh (40-storey)L-type side panel (×2)L (7.9 + 2 m) × H 1.5 m90 mm
Chief Tower, Phnom PenhSide panel (×2)L 9.3 m × H 1.5 m90 mm
Chief Tower, Phnom PenhFloor panel (×4)L 7.7 m × W 2 m130 mm
Doha hotel (model values)Floor windows (×4, separate)18.11 m glazed run100 mm
Doha hotelShort wall returnNot listed130 mm, the maximum in the original Doha case

How Thick Can One Cast Section Be?

A monolithic panel is one solid piece of acrylic. It is made in one polymerization cycle. That is the step where liquid MMA turns into solid PMMA. One cast can be up to 300 mm thick.

Size Limits

  • Laminated route: up to 800 mm. Layers are joined to make it thicker. The material and clarity needs are checked on their own.
  • Casting capacity: 45 polymerization pools. Stock blanks (raw cast panels) go up to 11,500 × 3,000 mm (100–250 mm thick) and 8,100 × 3,700 mm (120–300 mm thick).
  • Blank size is not the visible opening. The grooves and edges use up part of the panel.
  • A thickness range does not mean every size is in stock. See the monolithic casting page.
sky pool acrylic

Which Material Numbers Can You Quote for Sky Pool Acrylic?

Only quote numbers that come with a test standard. These numbers come from Grandview’s guide.

Tested Values

PropertyValueStandard
Light transmittance92.5%ISO 13468-1:1996
Tensile strength80.0 MPaEN ISO 527:2012
Vicat softening temperature103 °CISO 306:2013 Method B50
Thermal expansion72 × 10⁻⁶ K⁻¹ISO 11359-1:2014
Izod notched impact101 J/mASTM D256-10 Method A

The data sheet shows other material values. They are 93.2% transmittance and 0.30% haze (ASTM D1003). They also include 70.6 MPa tensile (ASTM D638) and 1.19 g/cm³ density (ASTM D792). These are not the pass rules for a finished panel.

The panel is UV-stabilized. Grandview promises it will not turn yellow for 30 years. This is under written warranty terms. Its UV test result is grey scale 5 (ISO 4892-3:2016 Cycle 1).

How Are the Panels Packed and Lifted?

A custom steel container transports a panel. For maritime shipment and crane lifting, the container was built. Wrapped and placed flat on a wooden foundation, the panels were transported to Dubai. They were secured to a strengthened frame using lifting slings and straps. Over the building’s front, a street-based, mobile crane hoisted the container. At 1.80 m, the pool’s depth indicator is showing.

While in Mexico City, the edges and faces were concealed. Delivery timing, site accessibility, and storage space were all factors to consider. The film was left on during the lift, as seen in the photos.

What to Plan for the Crane

  • Where the crane will stand, and if it can reach pool level.
  • Walls or canopies in the way.
  • A storage spot that is flat, shaded and safe.
  • Panel size and weight.

What Are the Steps to Install on a Roof?

Grandview’s guide gives six steps:

  1. Get the site ready: the opening, the support surfaces, the waterproofing and the way in.
  2. Lift the panel with a crane.
  3. Set it in place.
  4. Finish the joints.
  5. Let everything cure.
  6. Fill the pool in stages.

A local builder can install the panel with Grandview’s guide. A Grandview engineer can visit the site if needed. In Mexico City, the last joint work and waterproofing checks follow the approved project steps.

What Quality Checks Happen Before a Panel Leaves the Factory?

Each pool panel is verified against the authorized design. Workers measure thickness, length, breadth and outline. They use a tape and a caliper. They also examine the faces and borders for inclusions (tiny particles), bubbles, markings and deformation.

Factory Acceptance Tests (FAT) should be project specific. It does not replace checks on location. Every batch is tested for its tensile strength. It is also evaluated for Vicat softening temperature, the temperature at which the acrylic begins to soften. Heat treated machined acrylic. This implies that it is progressively heated and cooled to relieve tension. Bonding is done at 45° or 90°.

Visual Defect Limits

Defect typeSmallLarge
Inclusions0.3–1 mm²1–3 mm²
Bubbles0.3–0.5 mm²0.5–2 mm²

Per 1 m², there are two options. Option 1 allows 1 large and 2 small defects. Option 2 allows 4 small defects. You choose one option. You don’t add them in. Leave 150 mm from faults. Minimum distance between large flaws 300 mm. Use the rules agreed upon for your project.

The site states that their quality system is based on ISO 9001:2000. It also has RoHS and CE. Request copies of current certificates. See for yourself.

What Drives the Cost of Sky Pool Acrylic?

There is no set rate. There is no price-list at Grandview. Each panel is produced for a single project. So this article doesn’t quote a price. A quotation is made up of five items. They are looking at area, kind of support, depth of water, thickness and form. Packing, shipping and site work are additional.

sky pool acrylic

Budget Mistakes

  • Sizing by the visible area only.
  • Forgetting the deepest water depth.
  • Not checking stock and lead time.
  • Forgetting that curved or joined panels take longer.
  • Leaving out transport and site work.

Grandview says it quotes within 24 hours. You can ask for a free sample.

What Should You Send Before the Drawing Review?

Send drawings and site information together. Include pool design and section, opening size and panel outline, and water depth. The storage place is the storage spot, the lift route is the lift route, the waterproofing detail is the waterproofing detail and the support detail is the support detail. Quantity: 1 Location: North East India

The Doha model is a good habit. Call the end bay separately on the plan. The height is 3,870 mm and the next bay is 4,295 mm. Then the right opening is compared with the right panel.

Who Makes the Panels, and How Fast?

Guangzhou Grandview Material Ltd. reports 20+ years in pool and aquarium acrylic. Its factory covers over 20,000 m² and has over 100 employees. The home page lists 45 polymerization tanks, 8,000 tons of monthly capacity and 1,000 global projects. More than 20 steps run under one roof.

Plain flat panels take about 7–10 days. Joined, curved or specially cut panels take longer. The warranty is 30 years for outdoor anti-UV use, with written terms. Export markets include North America, Europe, the Middle East and Southeast Asia. See the manufacturing, quality control and About Us pages.

Frequently Asked Questions

How is a sky pool made?

A sky pool is developed in stages. Engineers first do an ANSYS computer test on water force and weight to determine the thickness. Then the panel is cast, trimmed, connected, polished and inspected. It is carefully heated up and cooled down to de-stress. A crane hoists it to the roof. It is placed by workers, sealed and the pool filled in phases.

What is a sky pool made of?

You make a sky pool with a frame and a transparent glass panel. The frame is concrete/steel. The panel consists of 100% virgin cast acrylic (PMMA). It includes: groove, pads, waterproof liner, setting blocks, sealer and grout. This is not glass.

How thick is a sky pool floor?

Many pool floors are made with panels 100–130 mm thick. This is only a guide. Windows of end 40-60 mm, 80-100 mm or 120-200 mm are common. Chief Tower floor panels are 130 mm thick. The ultimate figure is determined by engineers from water depth, panel size and support.

How much does a sky pool cost?

No fixed price exists. Each panel is made for one project. The cost depends on viewing area, water depth, support type, thickness and shape. Packing, transport and site work cost extra. Send your drawings and water depth. Grandview says it quotes within 24 hours.

Conclusion

Sky pool acrylic works best when you plan three things together. These are the design, the support and the lift.

Grandview Acrylic is a good place to start. It shows a test standard with each number. It shares real panel sizes. It also gives a free sample. This makes quotes easy to compare.

Send your drawings, deepest water depth, support type, quantity and location. Use the quote form. You can also call or message on WhatsApp at +86 133 1880 8573.

More Projects

Inquiry Now

Please give us a message for your enquiry, order or advice. Thanks a lot.