Three Curved Acrylic Pool Panels for a Resort in Saudi Arabia

Jeddah, Saudi Arabia

Three viewing arcs on the Red Sea

Grandview fabricated three curved acrylic pool panels for a Red Sea resort. One long viewing arc runs between landscaped islands, with a shorter panel following the curve of each side basin.

A clear curved acrylic pool panel stands upright in the workshop, with more panels behind it.
The Jeddah panels standing upright in Grandview’s workshop.

21.217 m

Main panel face arc

9.238 m

Each side panel face arc

150 mm

Reported max. thickness

One main arc and two tighter side curves

The concept plan shows a seaward pool extent of about 42.5 m. The main viewing panel spans the opening between the two islands. The east and west basins use matching panel radii, with each side profile set out in the dimension drawing.

Concept plan showing the curved edge of the Red Sea-facing pool, landscaped islands and cabanas.
Pool concept and landscaped islands.
Dimension drawing of the curved acrylic viewing panels for the main pool, east basin and west basin.
Panel profiles. Open for full dimensions.
PositionFace arc (mm)Viewing width (mm)Radius (mm)
Main pool21,21720,68854,001
East basin9,2388,68813,830
West basin9,2388,68813,830
The face arc follows the acrylic surface. Viewing width is measured straight across the opening. The project record lists a panel height of 1.7 m and a maximum thickness of 150 mm.

Where the factory joints were proposed

The Plan B drawing lays out four 9 m lengths with shorter end pieces. It marks five proposed factory joint lines across the three viewing runs.

Plan B diagram marking a proposed center joint and end joints between acrylic panel sections.
Plan B shows nominal section lengths and proposed joint locations.

Main run
Two 9 m sections and two 1.64 m end pieces, with joints at the center and near both ends.

Each side run
One 9 m section and a 0.34 m end piece, with a joint near the outer end.

See how thick sections are prepared and aligned during acrylic panel bonding.

The panels at full scale

In the wide workshop view, the upright panels show the scale of the project. The closer photographs trace the curve at the base and show the thickness of the clear acrylic edge.

Planning another curved pool wall?

What dimensions belong on each panel drawing?

Label the straight viewing width, face arc length and radius. Identify the face used for the arc and radius dimensions, and give each viewing opening its own reference on the pool plan.

When should the joint positions be reviewed?

Review them with the panel layout. The proposed assembly, transport dimensions and access at the pool all affect where sections can be joined. See the acrylic pool panels guide for the other inputs to a quote.

Send us your pool drawings

Share the pool plan, panel dimensions, design water depth, support arrangement and project location. Grandview can review the acrylic panel layout and prepare a quote for your project.

More Projects

Inquiry Now

Please give us a message for your enquiry, order or advice. Thanks a lot.